User-replaceable tip for #599705 - EXO guarded pH/ORP sensor
Smart, cost-saving technology for water quality measurements.
Exhaustible reagents are stored in this replaceable module and can be swapped-out as needed. Electronics & data are stored separately in the smart sensor base. Grants long-term costs savings by eliminating the need to re-buy the entire sensor after the reagents are depleted (approximately 12-18 months for pH/ORP, depending on use).
- NOT for use in EXO2 systems with a central wiper installed.
- EXO sensors and modules are not backwards compatible with 6-Series sondes.
|Depth / Pressure Rating / Limit||250m (820ft)|
|Desktop Software Compatible||KOR for EXO|
|Digital / Digital Sensors||Yes|
|Equipment used with||599705|
|Measurement Range||pH: 0 to 14 units|
|ORP: -999 to 999 mV|
|Precision||pH: ±0.1 pH units within ±10°C of calibration temp; ±0.2 pH units for entire temp range|
|(Within the environmental pH range of pH 4 to pH 10.)|
|ORP: ±?20 mV in Redox standard solutions|
|Resolution||pH: 0.01 units|
|ORP: 0.1 mV|
|Response Time||pH: T63<3 sec, ORP: T63<5 sec|
|Smart Sensors / Ports||Yes|
|Warranty||1 Year - Replaceable reagent modules for pH/ORP|
|Waterproof||Yes, when installed|