The EXO fDOM (fluorescent dissolved organic matter) sensor is a digital smart sensor featuring welded titanium construction and wet-mateable connectors. Complete calibration in less than 15 minutes using EXO's suite of smart sensors and intuitive KOR interface software.
WARNING: Emits ultraviolet light. Do not look directly into powered optical sensor.
NOTE: This sensor must be installed into an EXO Sonde to function. Does not function on its own.
- 0 to 300 ppb Quinine Sulfate equivalent (QSE) measurement range
- 0.01 ppb QSE resolution
- T63<2 sec response time
Compact and Accurate
The EXO platform offers a completely new approach - highly accurate, quick-response sensors in a small, easy-to-deploy and easy-to-maintain package. Gone are large and complicated sensor arrangements requiring complex integration.
All EXO sensors have onboard memory and processing, allowing users to easily calibrate and configure sensors at one location and distribute to various field sites.
Wet-mateable connectors allow for swaps in wet conditions, while the smart ports shut down any excessive current draws to prevent damage.
|Desktop Software Compatible||Yes|
|Digital / Digital Sensors||Yes|
|Equipment used with||EXO1, EXO2|
|Medium||Fresh, sea or polluted water|
|Operating Temperature||-5 to +50°C|
|Precision||Linearity: R2 >0.999 for serial dilution of 300 ppb QS solution|
|Detection Limit: 0.07 ppb QSE|
|Response Time||T63<2 sec|
|Storage Temperature||-20 to +80°C|
|Unit of Measure||QSU, ppb|
|Warranty||2 Years - Optical sensors|